Thermador Dishwasher Repair in South Florida

Possible causes: A drain line blocked at the garbage disposal or air gap; debris blocking the drain pump; a drain hose without the required 20–50 inch high loop.

Check first: Check the accessible drain connections and the filter under the model instructions. Standing water can be emptied with a ladle.

When to call: Water still remains. We check the pump, its cover and the hose routing, including the high loop.

Possible causes: A previous cycle not completed before unloading; a closed supply valve under the sink; a kinked or clogged supply line.

Check first: Check that the valve under the sink is open and the supply line has no kinks. Complete or cancel the previous cycle following your model instructions.

When to call: Filling faults keep recurring. We assess the intake and fill system.

Possible causes: The power switch not on; Delay Start active.

Check first: Check the power switch and whether Delay Start is active; cancel it or wait until the delay is complete. On top-control models, the display lights only with the door open.

When to call: It still cannot start after those checks. We assess the power, door sensor and controls.

Possible causes: Incoming water that is not hot enough, so the heat pump heats it; sensors adjusting the cycle as they detect soil.

When to call: Washing repeatedly stalls or ends with a fault. We check heating and circulation.

Check first: Turn off the water inflow. Do not keep restarting the dishwasher to clear the warning.

When to call: E15 appears. Arrange a leak inspection; our technician inspects the leak.