Miele Ice Maker Repair in South Florida

Possible causes: The appliance or IceMaker switched off; a water intake that is not open; an unvented water supply; drawers below not fully closed.

Check first: On KFNF 9959 iDE, make sure the appliance and IceMaker are switched on, the accessible water supply is open and the drawers below are fully closed.

When to call: Those checks do not restore ice. We inspect the intake and ice-making system.

Possible causes: Frequent refrigerator or freezer-drawer opening, which makes the compressor run more.

Check first: Reduce repeated door and drawer opening, and do not force frozen parts.

When to call: Ice buildup returns. We inspect the ice-making system.

Possible causes: On KFNF systems, several appliances using the fresh-water supply at once; on MasterCool dispensers, a clogged water filter or low water pressure.

Check first: On a KFNF system, notice whether other appliances on the same fresh-water supply were running while ice was made.

When to call: The problem continues. We check the fitted filter, water flow and ice production.

Possible causes: Cubes stored a long time in a seldom-used KFNF IceMaker absorbing the taste and smell of other food.

Check first: Empty the old ice and clean the cube container under its care instructions.

When to call: The odor returns with freshly made ice. We investigate the ice maker.

Check first: Close the accessible water shut-off valve immediately. Do not pull out built-in refrigeration to reach hidden plumbing.

When to call: Water has escaped from the appliance. Arrange service; we inspect the line, intake and pressure.

Possible causes: A water intake that is not open.

Check first: Check that the accessible supply valve is open.

When to call: The valve is open but the indicator keeps flashing and no ice forms. We check the intake and controls.

Possible causes: A kinked water hose; supply pressure below the 29–116 psi range MasterCool dispenser models require.

Check first: Check the visible water hose for kinks; do not pull out built-in refrigeration to reach hidden hoses.

When to call: The ice maker still does not work properly. We inspect hidden hoses and measure the supply; pressure requirements differ from KFNF systems.

Possible causes: Frozen ice blocking the dispenser spout.

What to do first: Do not force the spout or mechanism.

When to call: Cubes still will not dispense. We inspect the blockage and dispensing operation so you can use the existing ice supply again.