Dacor Dishwasher Repair in South Florida

Possible causes: A drain hose that is folded or clogged.

Check first: Check that the drain hose is not folded where you can see it, without pulling out the appliance, and clean the removable filter under the care instructions, at least once a month.

When to call: Water still remains. We inspect drainage; debris inside the pump chamber needs a qualified technician.

Check first: Close the door completely until it latches, then press Start. The floor light normally shows when a cycle is running.

When to call: It still will not run. We check the latch and controls.

Possible causes: A cold water supply, which adds heating time.

Check first: Check that the hot water supplied to the dishwasher reaches 120°F (49°C).

When to call: Cycles stay unusually long with suitable hot water. We check filling and heating.

Possible causes: Water pressure outside 20–120 psi (140–830 kPa); a filter or spray nozzles that need cleaning.

Check first: Clean and secure the filters and spray nozzles under the care instructions; clean the filter at least once a month.

When to call: Poor washing persists. We check the water supply and wash circulation.

Possible causes: AutoRelease Dry turned off in Settings.

Check first: Check that AutoRelease Dry is turned on in Settings. This drying function opens the door automatically.

When to call: Drying stays poor with the setting on. We check the door-release and drying operation.

Check first: Clean the filter at least once a month. For cleaning, run an empty Normal cycle without detergent, with a glass holding 8 oz of vinegar upright in the lower rack.

When to call: The odor returns with standing water. We check the drainage.